Cow Pi mark 1e Construction Instructions (Arduino Nano form factor, SPI communication)

These are the instructions to assemble a Cow Pi circuit using an Arduino Nano, a Nano clone, or another microcontroller board that has the same form factor. [1]

Tip

In addition to the professor and the TAs, you may freely seek help on this assignment from other students.

In the I/O labs, we will use a microcontroller board with some peripherals. In this prelab, you will assemble the hardware for the I/O labs.

---

• Prepare to Assemble the Cow Pi mark 1e
  • Inventory the Hardware
  • Assembling the Class Kit
• Insert the Microcontroller into the Breadboard
  • Breadboard Terminology
  • Install the Arduino Nano onto the Breadboard
• Install the IDE
  • Arduino IDE
  • Microsoft Terminal Server
  • VS Code with the PlatformIO Plugin
• Connect Power and Ground to Power Bus Strips
• Install the Light-Emitting Diode
• Install the CowPi and the CowPi_stdio Libraries
  • Install the Libraries for the Arduino IDE
  • Install the Libraries for PlatformIO
• Install the Slide Switches
• Install the Momentary Pushbuttons
  • This note applies only to 2-lead pushbuttons
  • This note applies only to 4-prong pushbuttons
  • Install the Buttons
• Install the Matrix Keypad
• Install the Display Module
• Kit Assembly is Complete

---

[1]

For now, the instructions are particular to Arduino Nano and Nano clones. We will later update the instructions for other boards with the same form factor. Five-volt microcontroller boards that have the same form factor as the Arduino Nano include the Nano itself and the Arduino Nano Every. Three-volt microcontroller boards that have the same form factor as the Arduino nano include the Arduino Nano 33 IoT, the Arduino Nano 33 BLE, and the Arduino Nano RP2040 Connect.